FENIX HT18R V2.0 rechargeable LED flashlight

The FENIX HT18R V2.0 is a powerful professional long-range LED flashlight with a beam distance of up to 1100 metres. It is designed for situations where you need to see far ahead, react quickly and access the light output you need with as few actions as possible.

Exceptional 1100 m beam distance

This flashlight’s most remarkable feature is its beam distance of up to 1100 metres. With a reach of more than a kilometre, it allows you to direct light onto distant objects and survey large areas.

The flashlight has been developed specifically for long-range illumination. This makes it a valuable tool when you need to inspect extensive sites, spot distant objects or assess your surroundings from a considerable distance.

A focused long-range beam is essential for professional outdoor work, search operations and other situations where visibility over long distances is critical.

Powerful 3700 lm light output

The FENIX HT18R V2.0 has a maximum light output of 3700 lumens. Its light source is a powerful Luminus SFT90 LED with an estimated service life of 50 000 hours.

The flashlight’s optical system combines high light output with a long-range beam, allowing you to illuminate objects even from a considerable distance.

The cool white light, with a colour temperature of approximately 6500 K, is well suited to outdoor use. 

Quick access to maximum light output

One of this flashlight’s key advantages is the ability to activate maximum light output instantly.

To use the Instant Burst function, simply press and hold the main switch. The flashlight immediately switches to full power, without you having to cycle through all the brightness levels first.

This is essential when you suddenly need to illuminate a distant object or access the brightest possible light quickly.

The Instant Strobe function also allows you to activate an intense flashing light directly from the control switch. Both instant-access functions make the flashlight efficient to operate when response speed is critical.

7 lighting modes and convenient dual-switch control

The FENIX HT18R V2.0 is equipped with two side switches that allow you to select lighting modes quickly and conveniently.

You have seven lighting modes to choose from: four brightness levels and three special flashing modes – Strobe, SOS and Beacon.

The four brightness levels allow you to adjust the lighting to suit the situation. Maximum output is ideal for illuminating distant objects, while lower levels conserve battery power and extend runtime.

Strobe mode produces an intense flashing light. SOS mode allows you to send the internationally recognised distress signal, while Beacon mode acts as a flashing signal light to make your location visible.

These functions extend the flashlight’s versatility for both everyday work and unexpected situations.

Up to 87 hours of runtime and USB-C fast charging

The FENIX HT18R V2.0 uses a high-capacity 6000 mAh Fenix ARB-L21-6000 rechargeable lithium-ion battery.

Maximum runtime reaches 87 hours in a lower-output mode. This allows you to use the flashlight for extended periods and choose the right balance between light output and battery life.

The battery is charged directly through the flashlight’s built-in USB-C fast-charging port. The charging port is located at the rear of the flashlight head and is protected by a sliding dust cover.

The charging port’s internal IP68 waterproof design provides additional protection against moisture.

The flashlight also has a battery level indicator that shows the remaining charge when you switch it on. A low-battery warning helps you recognise when it is time to recharge.

A charger with an output current of at least 2 A is recommended for charging the 21700 battery.

Durable aluminium body and IP68-protected charging port

The Fenix HT18R V2.0 is made from durable aircraft-grade T6061-T6 aluminium alloy, combining structural strength with relatively low weight.

The body’s HAIII hard-anodised finish increases abrasion and scratch resistance, helping the flashlight’s exterior withstand intensive use.

The robust construction is designed for professionals whose work demands reliable, durable equipment in challenging conditions.

Additional protection is provided by the USB-C charging port with an internal IP68 protection rating, while its sliding cover helps keep the charging connection clean.

Technical specifications

• Maximum light output: 3700 lm
• Maximum beam distance: 1100 m
• Maximum runtime: 87 hours
• Light source: Luminus SFT90 LED
• LED service life: 50 000 hours
• Colour temperature: approximately 6500 K
• Lighting modes: 4 brightness levels, Strobe, SOS, Beacon
• Controls: two side switches
• Instant-access functions: Instant Burst, Instant Strobe
• Battery: Fenix ARB-L21-6000, 21700 Li-ion
• Battery capacity: 6000 mAh
• Charging: USB-C fast charging
• Length: 199.7 mm
• Head diameter: 68 mm
• Body diameter: 25.4 mm
• Weight including battery: 358 g